Among the many ways of exchanging files between 2 systems, one of the most comfortable options is to share files between 2 systems that are connected to the same network. However, a few users have reported the following error when trying to share resources:
Cause of error 0x80070035 productivity:
Error 0x80070035 can occur when a user enters an incorrect network path name. The specified path must be pointing to a valid shared resource on the remote device. And note that you must enable Windows file or printer sharing on the remote device and that remote users must also have access to the resources.
Another possible cause of Network Path cannot be found errors is due to the lack of time synchronization on the devices. Put simply, that means that the clocks on the two connected devices are misaligned, making them unable to connect to each other via the Lan network.
Always remember to keep Windows devices on the local network synchronized through the Network Time Protocol. Make sure to use the correct username and password correctly when connecting to remote resources.
In the event that any Microsoft system services related to file sharing and printer sharing on the network fail, the Network Path Cannot Be Found error may also occur.
Instructions to fix error 0x80070035 in LAN
Method 1: Turn off the firewall
One of the most important steps to resolve Error 0x80070035 ‘The network path was not found’ by disabling the firewall. The steps you must follow for this are:
Step 1: Right-click the Antivirus Program icon from the system tray, then you must select the option Disable .
Step 2: Now, in the next step, you have to choose the time that Antivirus will remain disabled.
Step 3: After these steps are done, check to see if the error is fixed.
Step 4: Now you have to press the key Windows + I then select Control Panel.
Step 5: Next, click System and Security.
Step 6: Then click Windows Firewall.
Step 7: Now from the left pane, just click Turn on or turn off Windows Firewall.
Step 8: Choose Turn off Windows Firewall, then you must restart the PC. And see if the error has been fixed or not.
If the above method doesn't work, just follow the same steps to re-enable your Firewall.
See detailed instructions : Turn on / off "Windows Firewall" in Windows 10, 8, 7, Vista and XP
Method 2. Enable NetBIOS over TCP / IP
Another thing that will catch your attention once an error like this appears is NetBIOS over TCP.
The error itself implies that this feature is disabled and by enabling it you will be able to resolve the error permanently.
Here's how to turn on NetBIOS over TCP:
Step 1: Press Windows + R to open the dialog box Run.
Step 2: In the command line, paste NCPA.CPL and press Enter.
Step 3: Right-click on your default network and open Properties.
Step 4: Press Internet Protocol Version 4 (TCP / IPv4) and click Properties under.
Step 5: Click on it Advanced.
Step 6: Select tab WINS .
Step 7: Click on "Enable NetBIOS over TCP”And confirm the change.
Method 3: Check the TCP / IP NetBIOS Helper service
For the intranet to work seamlessly, you will need to verify that the NetBIOS TCP / IP Helper service is always running in the background.
The service must be enabled to run permanently with the system, but there are reports that stop after important system changes are applied by Windows Updates
Here's how to check and reactivate the TCP / IP NetBIOS Helper service:
Step 1: In the Windows Search bar, type Services and open Services from the list of results.
Step 2: Navigate to TCP / IP NetBIOS Helper.
Step 3: Right click on it and open Properties.
Step 4: In section Startup type, Please choose Automatic and confirm the change.
Step 5: Restart your PC and look for changes.
Good luck! No matter what questions you can ask below.
- Vietnamese people will be able to buy smartphones for only 500,000 VND - Knowledge sharing blog
- Bằng chứng nhận tiền
- Download Microsoft Office 2019 Link Fshare
- The Ministry of Justice proposed the Prime Minister to allow a pilot development of crypto policy
- The 'flash loan' attack DeFi changed everything